PART NUMBER - 2503 MF
57mm Child Resistant Vape Cartridge Tube (for 0.3ml carts) - 1500 Qty.
$127 per box - 30% off reg. price!
wholesale pop tops
bulk pop tops
wholesale pop tops
certified pop tops
  • Load image into Gallery viewer, wholesale pop tops
  • Load image into Gallery viewer, bulk pop tops
  • Load image into Gallery viewer, wholesale pop tops
  • Load image into Gallery viewer, certified pop tops
PART NUMBER - 2503 MF

57mm Child Resistant Vape Cartridge Tube (for 0.3ml carts) - 1500 Qty.

$127 per box - 30% off reg. price!

Clearance Deals!

  • The following product has been discontinued from CoolJarz Packaging. There is a limited stock amount left however, we urge customers to check out our new line of EcoLite pre roll tubes for a near equivalent at similar to lower price.
  • Discontinued products are clearance items and will not be made to order. The only amount available to purchase is what is indicated by the current stock level.

Description

This child resistant pop top vape cartridge container tube has an outside length of 57mm and an outside diameter of 25mm. This tube might be a tight fit for even shorter vape cartridges and won't fit longer vape carts so make sure you know the measurements of the carts you are going to package. This tube is part of our MicroFlipz line that we developed several years ago. What is special about the MicroFlipz line is that they have sequential lengths. There are seven different lengths and two different diameters. The thinner series of tubes in this line all have an outside diameter of 25mm and all of those have a part number starting with 25. The wider series in this line have a diameter of 31mm and all of those have a part number starting with 31. The intention was to create a, "series of tubes" that a customer could use to package longer pre-roll tubes, shorter pre-roll tubes, vape cartridges, flower, and concentrates. We also made sure they were US 16 CFR 1700.20 certified child resistant and had thinner walls as a way to reduce plastic consumption. We offer other pop-top tubes now but this series will always be near and dear to our hearts. We also need to add that these are all made in USA at our factory in Tustin, California.

  • Part Number: 2503MF
  • Size: 57mm
  • Outside Diameter: 1.100"
  • Outside Height: 2.250"
  • Recommended Use(s): Vape Carts
  • Capacity: Fits some 0.3ml Vape Carts. This won't fit some carts. Make sure you know the height of your carts before purchasing these tubes.
  • Material: Polypropylene
  • Made In USA: We are the manufacturer!
  • Child Resistant: US 16 CFR 1700.20 Certified

Additional Information

  • Outside Diameter Top: 1.100 inches
  • Inside Diameter Top: 0.850 inches
  • Outside Diameter Bottom: 0.850 inches
  • Inside Diameter Bottom: 0.770 inches
  • Outside Height: 2.250 inches
  • Inside Height: 2.150 inches
  • Fluid Ounces: 0.51 ounces
  • Fluid Milliliters: 15 milliliters
  • Cubic Inches: 0.92 cubic inches
  • Cubic Centimeters: 15.0 cubic centimeters
  • Box Quantity: 1500 pieces per box
  • Box Size: 16.25" x 16.25" x 20.50"
  • Box Weight: 18 pounds per box
  • Full Pallet Quantity: 36 boxes / 54,000 pieces per pallet
  • Full Pallet Weight: 688 pounds

Description

This child resistant pop top vape cartridge container tube has an outside length of 57mm and an outside diameter of 25mm. This tube might be a tight fit for even shorter vape cartridges and won't fit longer vape carts so make sure you know the measurements of the carts you are going to package. This tube is part of our MicroFlipz line that we developed several years ago. What is special about the MicroFlipz line is that they have sequential lengths. There are seven different lengths and two different diameters. The thinner series of tubes in this line all have an outside diameter of 25mm and all of those have a part number starting with 25. The wider series in this line have a diameter of 31mm and all of those have a part number starting with 31. The intention was to create a, "series of tubes" that a customer could use to package longer pre-roll tubes, shorter pre-roll tubes, vape cartridges, flower, and concentrates. We also made sure they were US 16 CFR 1700.20 certified child resistant and had thinner walls as a way to reduce plastic consumption. We offer other pop-top tubes now but this series will always be near and dear to our hearts. We also need to add that these are all made in USA at our factory in Tustin, California.

  • Part Number: 2503MF
  • Size: 57mm
  • Outside Diameter: 1.100"
  • Outside Height: 2.250"
  • Recommended Use(s): Vape Carts
  • Capacity: Fits some 0.3ml Vape Carts. This won't fit some carts. Make sure you know the height of your carts before purchasing these tubes.
  • Material: Polypropylene
  • Made In USA: We are the manufacturer!
  • Child Resistant: US 16 CFR 1700.20 Certified

Additional Information

  • Outside Diameter Top: 1.100 inches
  • Inside Diameter Top: 0.850 inches
  • Outside Diameter Bottom: 0.850 inches
  • Inside Diameter Bottom: 0.770 inches
  • Outside Height: 2.250 inches
  • Inside Height: 2.150 inches
  • Fluid Ounces: 0.51 ounces
  • Fluid Milliliters: 15 milliliters
  • Cubic Inches: 0.92 cubic inches
  • Cubic Centimeters: 15.0 cubic centimeters
  • Box Quantity: 1500 pieces per box
  • Box Size: 16.25" x 16.25" x 20.50"
  • Box Weight: 18 pounds per box
  • Full Pallet Quantity: 36 boxes / 54,000 pieces per pallet
  • Full Pallet Weight: 688 pounds