PART NUMBER - 2505 MF
74mm Child Resistant Vape Cartridge Tube (for 0.5ml - 1.0ml carts) - 1300 Qty.
$115 per box - 30% off reg. price!
Marijuana Flip tops
dram marijuana containers
6 dram pop tops
marijuana flip tops
  • Load image into Gallery viewer, Marijuana Flip tops
  • Load image into Gallery viewer, dram marijuana containers
  • Load image into Gallery viewer, 6 dram pop tops
  • Load image into Gallery viewer, marijuana flip tops
PART NUMBER - 2505 MF

74mm Child Resistant Vape Cartridge Tube (for 0.5ml - 1.0ml carts) - 1300 Qty.

$115 per box - 30% off reg. price!

Clearance Deals!

  • The following product has been discontinued from CoolJarz Packaging. There is a limited stock amount left however, we urge customers to check out our new line of EcoLite pre roll tubes for a near equivalent at similar to lower price.
  • Discontinued products are clearance items and will not be made to order. The only amount available to purchase is what is indicated by the current stock level.

  • This part has been replaced with our 78mmPR Tube
  • Part Number: 2505MF
  • Size: 74mm
  • Outside Diameter: 1.100"
  • Outside Height: 3.000"
  • Recommended Use(s): Vape Carts
  • Capacity: Fits 0.5ml - 1.0ml* Vape Carts *Does not fit all 1.0ml Vape Carts
  • Material: Polypropylene
  • Made In USA: We are the manufacturer!
  • Child Resistant: US 16 CFR 1700.20 Certified

Additional Information

  • Outside Diameter Top: 1.100 inch
  • Inside Diameter Top: 0.850 inches
  • Outside Diameter Bottom: 0.800 inches
  • Inside Diameter Bottom: 0.720 inches
  • Outside Height: 3.000 inches
  • Inside Height: 2.900 inches
  • Fluid Ounces: 0.74 ounces
  • Fluid Milliliters: 22 milliliters
  • Cubic Inches: 1.340 cubic inches
  • Cubic Centimeters: 22.0 cubic centimeters
  • Box Quantity: 1300 pieces per box
  • Box Size: 16.25" x 16.25" x 20.50"
  • Box Weight: 19 pounds
  • Full Pallet Quantity: 36 boxes / 46,800 pieces per pallet
  • Full Pallet Weight: 724 pounds

Description

This child resistant pop top vape cartridge container tube has an outside length of 74mm and an outside diameter of 25mm. This tube is part of our MicroFlipz line that we developed several years ago. What is special about the MicroFlipz line is that they have sequential lengths. There are seven different lengths and two different diameters. The thinner series of tubes in this line all have an outside diameter of 25mm and all of those have a part number starting with 25. The wider series in this line have a diameter of 31mm and all of those have a part number starting with 31. The intention was to create a, "series of tubes" that a customer could use to package longer pre-roll tubes, shorter pre-roll tubes, vape cartridges, flower, and concentrates. We also made sure they were US 16 CFR 1700.20 certified child resistant and had thinner walls as a way to reduce plastic consumption. We offer other pop-top tubes now but this series will always be near and dear to our hearts. We also need to add that these are all made in USA at our factory in Tustin, California.

  • This part has been replaced with our 78mmPR Tube
  • Part Number: 2505MF
  • Size: 74mm
  • Outside Diameter: 1.100"
  • Outside Height: 3.000"
  • Recommended Use(s): Vape Carts
  • Capacity: Fits 0.5ml - 1.0ml* Vape Carts *Does not fit all 1.0ml Vape Carts
  • Material: Polypropylene
  • Made In USA: We are the manufacturer!
  • Child Resistant: US 16 CFR 1700.20 Certified

Additional Information

  • Outside Diameter Top: 1.100 inch
  • Inside Diameter Top: 0.850 inches
  • Outside Diameter Bottom: 0.800 inches
  • Inside Diameter Bottom: 0.720 inches
  • Outside Height: 3.000 inches
  • Inside Height: 2.900 inches
  • Fluid Ounces: 0.74 ounces
  • Fluid Milliliters: 22 milliliters
  • Cubic Inches: 1.340 cubic inches
  • Cubic Centimeters: 22.0 cubic centimeters
  • Box Quantity: 1300 pieces per box
  • Box Size: 16.25" x 16.25" x 20.50"
  • Box Weight: 19 pounds
  • Full Pallet Quantity: 36 boxes / 46,800 pieces per pallet
  • Full Pallet Weight: 724 pounds

Description

This child resistant pop top vape cartridge container tube has an outside length of 74mm and an outside diameter of 25mm. This tube is part of our MicroFlipz line that we developed several years ago. What is special about the MicroFlipz line is that they have sequential lengths. There are seven different lengths and two different diameters. The thinner series of tubes in this line all have an outside diameter of 25mm and all of those have a part number starting with 25. The wider series in this line have a diameter of 31mm and all of those have a part number starting with 31. The intention was to create a, "series of tubes" that a customer could use to package longer pre-roll tubes, shorter pre-roll tubes, vape cartridges, flower, and concentrates. We also made sure they were US 16 CFR 1700.20 certified child resistant and had thinner walls as a way to reduce plastic consumption. We offer other pop-top tubes now but this series will always be near and dear to our hearts. We also need to add that these are all made in USA at our factory in Tustin, California.