PART NUMBER - 2506 MF
98mm Child Resistant Pop Top Pre-Roll Tubes - 900 Qty.
cones plastic tubes
child resistant joint tubes
98 mm joint tubes
cones plastic tubes
  • Load image into Gallery viewer, cones plastic tubes
  • Load image into Gallery viewer, child resistant joint tubes
  • Load image into Gallery viewer, 98 mm joint tubes
  • Load image into Gallery viewer, cones plastic tubes
PART NUMBER - 2506 MF

98mm Child Resistant Pop Top Pre-Roll Tubes - 900 Qty.

Alert! This product has changed to Part# 98N

We have phased out the 2506MF and are now offering an improved replacement, Part# 98N. The specifications are similar but the 98N is made with a new and improved mold. The per-piece price on the 98N is also lower than the 2506MF. We really think you will like the 98N better than the 2506MF, please check out the new part here to learn more.

Clearance Deals!

  • The following product has been discontinued from CoolJarz Packaging. There is a limited stock amount left however, we urge customers to check out our new line of EcoLite pre roll tubes for a near equivalent at similar to lower price.
  • Discontinued products are clearance items and will not be made to order. The only amount available to purchase is what is indicated by the current stock level.

Description

This product has been replaced by a newly designed container with similar heights and volume known as the 98N.  

This child resistant pop top pre-roll tube has an outside length of 102mm and an outside diameter of 25mm. This tube is part of our MicroFlipz line that we developed several years ago. What is special about the MicroFlipz line is that they have sequential lengths. There are seven different lengths and two different diameters. The thinner series of tubes in this line all have an outside diameter of 25mm and all of those have a part number starting with 25. The wider series in this line have a diameter of 31mm and all of those have a part number starting with 31. The intention was to create a, "series of tubes" that a customer could use to package longer pre-roll tubes, shorter pre-roll tubes, vape cartridges, flower, and concentrates. We also made sure they were US 16 CFR 1700.20 certified child resistant and had thinner walls as a way to reduce plastic consumption. We offer other pop-top tubes now but this series will always be near and dear to our hearts. We also need to add that these are all made in USA at our factory in Tustin, California.

  • Part Number: 2506MF
  • Size: 98mm
  • Outside Diameter: 1.100"
  • Outside Height: 4.000"
  • Recommended Use(s): Pre-Roll
  • Capacity (Pre-Roll): Fits 1-2 Pre-Rolls
  • Capacity (Vape Cartridge): Fits 0.5ml-1.0ml Vape Carts
  • Material: Polypropylene
  • Made In USA: We are the manufacturer!
  • Child Resistant: US 16 CFR 1700.20 Certified

Additional Information

  • Outside Diameter Top: 1.100 inches
  • Inside Diameter Top: 0.850 inches
  • Outside Diameter Bottom: 0.800 inches
  • Inside Diameter Bottom: 0.720 inches
  • Outside Height: 4.000 inches
  • Inside Height: 3.900 inches
  • Fluid Ounces: 0.91 ounces
  • Fluid Milliliters: 27 milliliters
  • Cubic Inches: 1.650 cubic inches
  • Cubic Centimeters: 27.0 cubic centimeters
  • Box Quantity: 900 pieces per box
  • Box Size: 16.25" x 16.25" x 20.50"
  • Box Weight: 16 pounds per box
  • Full Pallet Quantity: 36 boxes / 32,400 pieces per pallet
  • Full Pallet Weight: 616 pounds

Description

This product has been replaced by a newly designed container with similar heights and volume known as the 98N.  

This child resistant pop top pre-roll tube has an outside length of 102mm and an outside diameter of 25mm. This tube is part of our MicroFlipz line that we developed several years ago. What is special about the MicroFlipz line is that they have sequential lengths. There are seven different lengths and two different diameters. The thinner series of tubes in this line all have an outside diameter of 25mm and all of those have a part number starting with 25. The wider series in this line have a diameter of 31mm and all of those have a part number starting with 31. The intention was to create a, "series of tubes" that a customer could use to package longer pre-roll tubes, shorter pre-roll tubes, vape cartridges, flower, and concentrates. We also made sure they were US 16 CFR 1700.20 certified child resistant and had thinner walls as a way to reduce plastic consumption. We offer other pop-top tubes now but this series will always be near and dear to our hearts. We also need to add that these are all made in USA at our factory in Tustin, California.

  • Part Number: 2506MF
  • Size: 98mm
  • Outside Diameter: 1.100"
  • Outside Height: 4.000"
  • Recommended Use(s): Pre-Roll
  • Capacity (Pre-Roll): Fits 1-2 Pre-Rolls
  • Capacity (Vape Cartridge): Fits 0.5ml-1.0ml Vape Carts
  • Material: Polypropylene
  • Made In USA: We are the manufacturer!
  • Child Resistant: US 16 CFR 1700.20 Certified

Additional Information

  • Outside Diameter Top: 1.100 inches
  • Inside Diameter Top: 0.850 inches
  • Outside Diameter Bottom: 0.800 inches
  • Inside Diameter Bottom: 0.720 inches
  • Outside Height: 4.000 inches
  • Inside Height: 3.900 inches
  • Fluid Ounces: 0.91 ounces
  • Fluid Milliliters: 27 milliliters
  • Cubic Inches: 1.650 cubic inches
  • Cubic Centimeters: 27.0 cubic centimeters
  • Box Quantity: 900 pieces per box
  • Box Size: 16.25" x 16.25" x 20.50"
  • Box Weight: 16 pounds per box
  • Full Pallet Quantity: 36 boxes / 32,400 pieces per pallet
  • Full Pallet Weight: 616 pounds