PART NUMBER - SST STEAM HEAD
Shrink Sleeve Sealing Machine Steam Head (CoolJarz™ SST)
$490.00
Shrink Sleeve Sealing Machine Steam Head (CoolJarz™ SST)
Shrink Sleeve Sealing Machine Steam Head (CoolJarz™ SST)
  • Load image into Gallery viewer, Shrink Sleeve Sealing Machine Steam Head (CoolJarz™ SST)
  • Load image into Gallery viewer, Shrink Sleeve Sealing Machine Steam Head (CoolJarz™ SST)
PART NUMBER - SST STEAM HEAD

Shrink Sleeve Sealing Machine Steam Head (CoolJarz™ SST)

$490.00

Description

These are specially designed steam heads for the SST Shrink Sleeve Labeling Machine. They are essentially miniature steam tunnels that heat up and shrink the sleeve label onto the tube within the second it takes the tube to travel the length of the head. They are also engineered to capture and funnel excess moisture back into the water reservoir to eliminate most of the condensation from dripping out of the head. We spent an incredibly long time designing and testing these heads and we are so proud of how they came out. There are three sizes of heads that are all sized to work with a specific CoolJarz™ tube size.

  • .688 Steam Head – Compatible with these CoolJarz™ part numbers: 68mmch, 78mmpr, 98mmpr, and 116mmpr. These four tubes all have the same diameter but varying heights.
  • 25mm Steam Head – Compatible with these CoolJarz™ part numbers: 114N and 126N. These two tubes both have the same diameter but varying heights.
  • 31mm Steam Head – Compatible with these CoolJarz™ part numbers: 114W, 8Dram, and 13Dram. These three tubes all have the same diameter but varying heights.

About the CoolJarz™ SST Shrink Sleeve Labeling Machine

The CoolJarz™ SST is a portable take on the room-sized steam tunnels often used with shrink sleeves. The SST takes up only 4 square feet of space to operate. We refer to this as a shrink sleeve labeling machine because we think this machine can replace the need for traditional labels in our industry. Traditional glued labels can peel off and can be easily damaged. The glue leaves residue on the tube. Often an extra shrink band is needed over your label if your state requires tamper-evident packaging. Labeling machines constantly break and need to be recalibrated. Shrink sleeve labels are the future. They are not glued to the tube so customers can remove the entire sleeve and leave a clean tube. This blank tube could then be re-used or recycled easier. Shrink sleeve labels wrap around the entire tube and have a built-in tamper evident perforation. It only takes a one-second drop down the SST steam chute to shrink the sleeve to your tube. There is no recalibrating the SST, just turn it on and start dropping tubes down the chute. You have to see it to believe it.

Product Video

Description

These are specially designed steam heads for the SST Shrink Sleeve Labeling Machine. They are essentially miniature steam tunnels that heat up and shrink the sleeve label onto the tube within the second it takes the tube to travel the length of the head. They are also engineered to capture and funnel excess moisture back into the water reservoir to eliminate most of the condensation from dripping out of the head. We spent an incredibly long time designing and testing these heads and we are so proud of how they came out. There are three sizes of heads that are all sized to work with a specific CoolJarz™ tube size.

  • .688 Steam Head – Compatible with these CoolJarz™ part numbers: 68mmch, 78mmpr, 98mmpr, and 116mmpr. These four tubes all have the same diameter but varying heights.
  • 25mm Steam Head – Compatible with these CoolJarz™ part numbers: 114N and 126N. These two tubes both have the same diameter but varying heights.
  • 31mm Steam Head – Compatible with these CoolJarz™ part numbers: 114W, 8Dram, and 13Dram. These three tubes all have the same diameter but varying heights.

About the CoolJarz™ SST Shrink Sleeve Labeling Machine

The CoolJarz™ SST is a portable take on the room-sized steam tunnels often used with shrink sleeves. The SST takes up only 4 square feet of space to operate. We refer to this as a shrink sleeve labeling machine because we think this machine can replace the need for traditional labels in our industry. Traditional glued labels can peel off and can be easily damaged. The glue leaves residue on the tube. Often an extra shrink band is needed over your label if your state requires tamper-evident packaging. Labeling machines constantly break and need to be recalibrated. Shrink sleeve labels are the future. They are not glued to the tube so customers can remove the entire sleeve and leave a clean tube. This blank tube could then be re-used or recycled easier. Shrink sleeve labels wrap around the entire tube and have a built-in tamper evident perforation. It only takes a one-second drop down the SST steam chute to shrink the sleeve to your tube. There is no recalibrating the SST, just turn it on and start dropping tubes down the chute. You have to see it to believe it.

Product Video