PART NUMBER - SST STEAM HEAD
Shrink Sleeve Sealing Machine Steam Head (CoolJarz™ SST)
$490.00
cooljarz sst shrink sleeve label machine printer for custom labels and pre roll tubes steam tunnel machine steam head by itself
cooljarz sst shrink sleeve label machine printer for custom labels and pre roll tubes steam tunnel machine steam head by itself stock heads
  • Load image into Gallery viewer, cooljarz sst shrink sleeve label machine printer for custom labels and pre roll tubes steam tunnel machine steam head by itself
  • Load image into Gallery viewer, cooljarz sst shrink sleeve label machine printer for custom labels and pre roll tubes steam tunnel machine steam head by itself stock heads
PART NUMBER - SST STEAM HEAD

Shrink Sleeve Sealing Machine Steam Head (CoolJarz™ SST)

$490.00

Description

SST Steam Heads are made to go interchangeably with our shrink sleeve machine so users can quickly switch between container sizes with no inconvenience. The steam head itself serves as a small and quick steam tunnel for containers with shrink sleeves to pass through fully sleeved. This is an upgrade from the slow conveyor belt style “portable” shrink sleeve tunnels and heat guns. They are also engineered to capture and funnel excess moisture back into the water reservoir to eliminate most of the condensation from dripping out of the head.

Each Steam Head contains grooves that rotate the containers for an even application of steam and heat. We have these steam heads currently in 3 stock sizes but custom steam head sizes are also available upon request.

  • .688 Steam Head – Compatible with these CoolJarz™ part numbers: 68mmch, 78mmpr, 98mmpr, and 116mmpr. These four tubes all have the same diameter but varying heights.
  • 25mm Steam Head – Compatible with these CoolJarz™ part numbers: 114N and 126N. These two tubes both have the same diameter but varying heights.
  • 31mm Steam Head – Compatible with these CoolJarz™ part numbers: 114W, 8Dram, and 13Dram. These three tubes all have the same diameter but varying heights.
  • 41mm Steam Head - Compatible with this  CoolJarz™ part number: 19Dram
  • 51mm Steam Head - Compatible with this CoolJarz™ part number: 30Dram

About the CoolJarz™ SST Shrink Sleeve Labeling Machine

The CoolJarz™ SST is a portable take on the room-sized steam tunnels often used with shrink sleeves. The compact SST Shrink Sleeve Machine takes up only 4 square feet of space to operate and the machine itself only takes up about 2 square feet of table space. The SST shrink sleeve machine has speeds comparable to automatic industrial sleeving machines without the clutter. Start sleeving containers in a single one-second drop down the SST steam chute. This machine works with shrink sleeve bands, partial, and full-body labels. There is no recalibrating the SST shrink wrap machine, just turn it on and start dropping tubes down the steam head.

Product Videos

Description

SST Steam Heads are made to go interchangeably with our shrink sleeve machine so users can quickly switch between container sizes with no inconvenience. The steam head itself serves as a small and quick steam tunnel for containers with shrink sleeves to pass through fully sleeved. This is an upgrade from the slow conveyor belt style “portable” shrink sleeve tunnels and heat guns. They are also engineered to capture and funnel excess moisture back into the water reservoir to eliminate most of the condensation from dripping out of the head.

Each Steam Head contains grooves that rotate the containers for an even application of steam and heat. We have these steam heads currently in 3 stock sizes but custom steam head sizes are also available upon request.

  • .688 Steam Head – Compatible with these CoolJarz™ part numbers: 68mmch, 78mmpr, 98mmpr, and 116mmpr. These four tubes all have the same diameter but varying heights.
  • 25mm Steam Head – Compatible with these CoolJarz™ part numbers: 114N and 126N. These two tubes both have the same diameter but varying heights.
  • 31mm Steam Head – Compatible with these CoolJarz™ part numbers: 114W, 8Dram, and 13Dram. These three tubes all have the same diameter but varying heights.
  • 41mm Steam Head - Compatible with this  CoolJarz™ part number: 19Dram
  • 51mm Steam Head - Compatible with this CoolJarz™ part number: 30Dram

About the CoolJarz™ SST Shrink Sleeve Labeling Machine

The CoolJarz™ SST is a portable take on the room-sized steam tunnels often used with shrink sleeves. The compact SST Shrink Sleeve Machine takes up only 4 square feet of space to operate and the machine itself only takes up about 2 square feet of table space. The SST shrink sleeve machine has speeds comparable to automatic industrial sleeving machines without the clutter. Start sleeving containers in a single one-second drop down the SST steam chute. This machine works with shrink sleeve bands, partial, and full-body labels. There is no recalibrating the SST shrink wrap machine, just turn it on and start dropping tubes down the steam head.

Product Videos