Description
These orange thermal-resistant gloves come in a box of 100. They are for use with the CoolJarz™ SST shrink sleeve labeling system. The steam rising from the top of the steam heads can get hot so it is recomended that employees wear some level of heat protection on their hands when operating the SST machine for long periods of time.
About the CoolJarz™ SST Shrink Sleeve Labeling Machine
The CoolJarz™ SST is a portable take on the room-sized steam tunnels often used with shrink sleeves. The SST takes up only 4 square feet of space to operate. We refer to this as a shrink sleeve labeling machine because we think this machine can replace the need for traditional labels in our industry. Traditional glued labels can peel off and can be easily damaged. The glue leaves residue on the tube. Often an extra shrink band is needed over your label if your state requires tamper-evident packaging. Labeling machines constantly break and need to be recalibrated. Shrink sleeve labels are the future. They are not glued to the tube so customers can remove the entire sleeve and leave a clean tube. This blank tube could then be re-used or recycled easier. Shrink sleeve labels wrap around the entire tube and have a built-in tamper evident perforation. It only takes a one-second drop down the SST steam chute to shrink the sleeve to your tube. There is no recalibrating the SST, just turn it on and start dropping tubes down the chute. You have to see it to believe it.
Product Video
Description
These orange thermal-resistant gloves come in a box of 100. They are for use with the CoolJarz™ SST shrink sleeve labeling system. The steam rising from the top of the steam heads can get hot so it is recomended that employees wear some level of heat protection on their hands when operating the SST machine for long periods of time.
About the CoolJarz™ SST Shrink Sleeve Labeling Machine
The CoolJarz™ SST is a portable take on the room-sized steam tunnels often used with shrink sleeves. The SST takes up only 4 square feet of space to operate. We refer to this as a shrink sleeve labeling machine because we think this machine can replace the need for traditional labels in our industry. Traditional glued labels can peel off and can be easily damaged. The glue leaves residue on the tube. Often an extra shrink band is needed over your label if your state requires tamper-evident packaging. Labeling machines constantly break and need to be recalibrated. Shrink sleeve labels are the future. They are not glued to the tube so customers can remove the entire sleeve and leave a clean tube. This blank tube could then be re-used or recycled easier. Shrink sleeve labels wrap around the entire tube and have a built-in tamper evident perforation. It only takes a one-second drop down the SST steam chute to shrink the sleeve to your tube. There is no recalibrating the SST, just turn it on and start dropping tubes down the chute. You have to see it to believe it.
Product Video
Follow Us on Social Media
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.