Description
This 2 gallon water bottle with patent-pending cap is for use with the CoolJarz™ SST Shrink Sleeve Labeling Machine. This reservoir will supply your SST with the water supply needed to generate steam for hours on end. Our SST shrink sleeve machine is built to funnel as much water back into the reserve as possible not only to save on water consumption but so you may also continue operating for as long as possible without needing to refill.
PLEASE NOTE: Our newly redesigned water bottle cap will come pre-greased and only needs to be screwed on to make contact with the bottle edge and the o-ring inside the cap. Only an additional 1/8 turn is required to tighten the cap down. Do NOT over-tighten the cap.
About the CoolJarz™ SST Shrink Sleeve Labeling Machine
The CoolJarz™ SST is a portable take on the room-sized steam tunnels often used with shrink sleeves. The SST takes up only 4 square feet of space to operate. We refer to this as a shrink sleeve labeling machine because we think this machine can replace the need for traditional labels in our industry. Traditional glued labels can peel off and can be easily damaged. The glue leaves residue on the tube. Often an extra shrink band is needed over your label if your state requires tamper-evident packaging. Labeling machines constantly break and need to be recalibrated. Shrink sleeve labels are the future. They are not glued to the tube so customers can remove the entire sleeve and leave a clean tube. This blank tube could then be re-used or recycled easier. Shrink sleeve labels wrap around the entire tube and have a built-in tamper evident perforation. It only takes a one-second drop down the SST steam chute to shrink the sleeve to your tube. There is no recalibrating the SST, just turn it on and start dropping tubes down the chute. You have to see it to believe it.
Product Video
Description
This 2 gallon water bottle with patent-pending cap is for use with the CoolJarz™ SST Shrink Sleeve Labeling Machine. This reservoir will supply your SST with the water supply needed to generate steam for hours on end. Our SST shrink sleeve machine is built to funnel as much water back into the reserve as possible not only to save on water consumption but so you may also continue operating for as long as possible without needing to refill.
PLEASE NOTE: Our newly redesigned water bottle cap will come pre-greased and only needs to be screwed on to make contact with the bottle edge and the o-ring inside the cap. Only an additional 1/8 turn is required to tighten the cap down. Do NOT over-tighten the cap.
About the CoolJarz™ SST Shrink Sleeve Labeling Machine
The CoolJarz™ SST is a portable take on the room-sized steam tunnels often used with shrink sleeves. The SST takes up only 4 square feet of space to operate. We refer to this as a shrink sleeve labeling machine because we think this machine can replace the need for traditional labels in our industry. Traditional glued labels can peel off and can be easily damaged. The glue leaves residue on the tube. Often an extra shrink band is needed over your label if your state requires tamper-evident packaging. Labeling machines constantly break and need to be recalibrated. Shrink sleeve labels are the future. They are not glued to the tube so customers can remove the entire sleeve and leave a clean tube. This blank tube could then be re-used or recycled easier. Shrink sleeve labels wrap around the entire tube and have a built-in tamper evident perforation. It only takes a one-second drop down the SST steam chute to shrink the sleeve to your tube. There is no recalibrating the SST, just turn it on and start dropping tubes down the chute. You have to see it to believe it.