Shrink Sleeve Machine System (CoolJarz™ SST) | IN-STOCK READY TO SHIP
- Certifications: UL Certified.
- Power Supply: 120V-1300W-11Amps.
- Cord Plug: NEMA 5-15.
- Water Bottle Capacity: 2 Gallons.
- Operation per Filling: Approximately 4 Hours.
- Assembled Dimensions: 22” x 17” x 45”.
- Steamer Housing: Cast Aluminum.
- Steam Generator: Brass.
- Steam Head Material: Polycarbonate Polyester Blend.
- Manufacturer: Cooljarz™
- Factory Direct: Made In USA
- U.S. Patent No. 11,548,673, 11,603,227 and 12,103,724
- SST Machine Warranty: 12 Months including machine and parts (More Details: Warranty Page)
- SST Printer and Laptop Warranty: 12 Months
- Power Supply Configurations
- View our Set-Up and Maintenance Videos
- Contact us if you need a non-North America plug prior to ordering
- .688"/.750" Steam Head – Compatible with these CoolJarz™ part numbers: 68mmCH, 78mmPR, 98mmPR, 116mmPR, 78mmPR-W, 90mmPR-W, 98mmPR-W, 116mmPR-W. These 8 tubes have similar diameters that are all compatible with this steam head.
- 25mm Steam Head – Compatible with these CoolJarz™ part numbers: 114N and 126N. These two tubes both have the same diameter but varying heights.
- 31mm Steam Head – Compatible with these CoolJarz™ part numbers: 114W, 8DRAM, and 13DRAM. These three tubes all have the same diameter but varying heights.
- 41mm Steam Head - Compatible with this CoolJarz™ part number: 19DRAM
- Our 30DRAM and 60DRAM EcoLite containers will require our 2" Version 2 steam head.
Steam Head Size Guide
Shrink Sleeve Labeling Machinery
Easy Portable Pre-Roll Tube Branding
The CoolJarz™ SST is a portable take on the room-sized steam tunnels often used for shrink sleeve labels. The compact SST Shrink Sleeve Machine takes only 4 square feet of space to operate and the machine itself only takes about 2 square feet of table space. The SST shrink sleeve machine has speeds comparable to automatic industrial sleeving machines without the clutter. Sleeving containers becomes a quick and simple one-second drop down the SST steam head tunnel. This machine works with shrink sleeve bands, partial, and full-body labels. There is no recalibrating the SST shrink wrap machine, just turn it on and start sleeving.
Shrink Sleeve Label Applicator
Shrink sleeve labels are able to cover more real estate on your products' containers for professional branding versus traditional labels. Shrink labels also have a built-in tamper-evident perforated seal. Other shrink sleeve labeling equipment require constant repairs and recalibration. The CoolJarz™ SST uses steam heat to shrink and seal PET, PVC, and OPS labels with ease. Steam is the preferred method of shrinking product labels because its low heat is capable of applying labels without damaging the product within. Another benefit is its reduction in wrinkles and bubbles in comparison to heat guns. Traditional glued labels can peel off, damage easily, and leave a sticky residue on the tube. Shrink sleeve labels come off clean, allowing the tube to be re-used or recycled.
Our New Upgraded Steam Head Ver. 2
We’ve upgraded our standard steam head to work with heavier, glass, and more contoured packaging. This new steam head contains a servo-actuated stopper that will catch your sleeved containers halfway through to give them an extra blast of heat. This extra time allows heavier containers such as glass tinctures, bottles, jars, and cans to be fully sleeved with minimal to no bubbles or wrinkles. It also allows larger and more complex sleeves and containers to fully sleeve within a second’s time. You will now be able to combine multiple products into one sleeve as seen in duo-packs and multi-packs, and shrink deep grooves and curves much easier. The motorized system even has “ready-to-go” lights indicating when to catch and insert your next container.
Batch Information Printers for Pre Roll Tubes
These thermal printers print variable compliance text directly onto our shrink sleeves, for customers who need to change batch information on each round of sellable products. They can also be used to print QR codes, compliance text, special offers, ingredients, testing results, and more. They use a thermal transfer ribbon instead of print cartridges, are compatible with most Windows computers, and take five minutes to set up with downloadable software. The built-in cutter attachment can cut 900 sleeves per hour. The wide model can print compliance text on labels that fit our 60 dram, 30 dram, and 19-dram containers. It can also print anything smaller. The regular model can print on labels for our pre-roll tubes including the 78mm, 98mm, 116mm and our wide pre-roll tubes: 114N, 114W and 126N.
Steam Heads for Every Tube Size
There are 5 stock sizes of steam heads to choose from. Custom-sized steam heads are available upon request. This shrink sleeve machine isn't just for pre-roll tubes! Bottles and containers in the beauty, food, and beverage, and personal care industry works great as well. Our video explains the differences between the steam heads to help you decide on the size(s) that are right for you. Our new version 2 steam heads come in 9 sizes! Each steam head contains grooves that rotate the containers for an even application of steam and heat. Our ver. 2 steam heads come in sizes with diameters starting at a one-half inch and increasing in quarter-inch increments, going all the way up to two and one-half inches. Custom sizes are available upon request.
Custom Shrink Sleeve Labels and Design Services Available
Need custom shrink sleeve labels? CoolJarz™ has you covered. We offer custom shrink sleeve label printing and design services as well. Whether you have a label design ready to go, or no design experience at all, CoolJarz™ will help. If you need help designing a shrink sleeve label, our team can create a unique design from scratch. If you want to design the label yourself check out one of our label templates to see how everything fits. Our proofing and approval process makes getting a custom shrink sleeve label simple and easy for everyone. We also have 3 options of labels for customer-printed variable compliance text as well which can be printed with the printer and computer in our bundle package.
New Tamper-Evident Shrink Band Steam Head Applicator
This all-new steam head is specifically designed to apply tamper-evident shrink bands to pre-roll tubes. This essentially turns our shrink sleeve machine into a shrink band applicator. This method is much quicker than a heat gun and safer. Simply fit your shrink band to your pre-roll tube and insert the tube into the steam cavity. Only 1-2 seconds is needed for the perfectly sealed shrink band every time. Each steam head is engineered to capture and funnel excess moisture back into the water reservoir avoiding having to refill your water tank. This steam head fits Pre Roll Tubes from .688" to .750" in diameter. Tubes compatible with this steam head include our: 68mmch, 78mmpr, 98mmpr, 116mmpr, 78mmpr-w, 90mmpr-w, 98mmpr-w, and 116mmpr-w. This steam head is compatible with either of our SST and SST SE Shrink Sleeve Labeling Machines.
SST SE Machine Versus SST System
Shrink Sleeve Labeling Machinery
Easy Portable Pre-Roll Tube Branding
The CoolJarz™ SST is a portable take on the room-sized steam tunnels often used for shrink sleeve labels. The compact SST Shrink Sleeve Machine takes only 4 square feet of space to operate and the machine itself only takes about 2 square feet of table space. The SST shrink sleeve machine has speeds comparable to automatic industrial sleeving machines without the clutter. Sleeving containers becomes a quick and simple one-second drop down the SST steam head tunnel. This machine works with shrink sleeve bands, partial, and full-body labels. There is no recalibrating the SST shrink wrap machine, just turn it on and start sleeving.
Shrink Sleeve Label Applicator
Shrink sleeve labels are able to cover more real estate on your products' containers for professional branding versus traditional labels. Shrink labels also have a built-in tamper-evident perforated seal. Other shrink sleeve labeling equipment require constant repairs and recalibration. The CoolJarz™ SST uses steam heat to shrink and seal PET, PVC, and OPS labels with ease. Steam is the preferred method of shrinking product labels because its low heat is capable of applying labels without damaging the product within. Another benefit is its reduction in wrinkles and bubbles in comparison to heat guns. Traditional glued labels can peel off, damage easily, and leave a sticky residue on the tube. Shrink sleeve labels come off clean, allowing the tube to be re-used or recycled.
Our New Upgraded Steam Head Ver. 2
We’ve upgraded our standard steam head to work with heavier, glass, and more contoured packaging. This new steam head contains a servo-actuated stopper that will catch your sleeved containers halfway through to give them an extra blast of heat. This extra time allows heavier containers such as glass tinctures, bottles, jars, and cans to be fully sleeved with minimal to no bubbles or wrinkles. It also allows larger and more complex sleeves and containers to fully sleeve within a second’s time. You will now be able to combine multiple products into one sleeve as seen in duo-packs and multi-packs, and shrink deep grooves and curves much easier. The motorized system even has “ready-to-go” lights indicating when to catch and insert your next container.
Batch Information Printers for Pre Roll Tubes
These thermal printers print variable compliance text directly onto our shrink sleeves, for customers who need to change batch information on each round of sellable products. They can also be used to print QR codes, compliance text, special offers, ingredients, testing results, and more. They use a thermal transfer ribbon instead of print cartridges, are compatible with most Windows computers, and take five minutes to set up with downloadable software. The built-in cutter attachment can cut 900 sleeves per hour. The wide model can print compliance text on labels that fit our 60 dram, 30 dram, and 19-dram containers. It can also print anything smaller. The regular model can print on labels for our pre-roll tubes including the 78mm, 98mm, 116mm and our wide pre-roll tubes: 114N, 114W and 126N.
Steam Heads for Every Tube Size
There are 5 stock sizes of steam heads to choose from. Custom-sized steam heads are available upon request. This shrink sleeve machine isn't just for pre-roll tubes! Bottles and containers in the beauty, food, and beverage, and personal care industry works great as well. Our video explains the differences between the steam heads to help you decide on the size(s) that are right for you. Our new version 2 steam heads come in 9 sizes! Each steam head contains grooves that rotate the containers for an even application of steam and heat. Our ver. 2 steam heads come in sizes with diameters starting at a one-half inch and increasing in quarter-inch increments, going all the way up to two and one-half inches. Custom sizes are available upon request.
Custom Shrink Sleeve Labels and Design Services Available
Need custom shrink sleeve labels? CoolJarz™ has you covered. We offer custom shrink sleeve label printing and design services as well. Whether you have a label design ready to go, or no design experience at all, CoolJarz™ will help. If you need help designing a shrink sleeve label, our team can create a unique design from scratch. If you want to design the label yourself check out one of our label templates to see how everything fits. Our proofing and approval process makes getting a custom shrink sleeve label simple and easy for everyone. We also have 3 options of labels for customer-printed variable compliance text as well which can be printed with the printer and computer in our bundle package.
New Tamper-Evident Shrink Band Steam Head Applicator
This all-new steam head is specifically designed to apply tamper-evident shrink bands to pre-roll tubes. This essentially turns our shrink sleeve machine into a shrink band applicator. This method is much quicker than a heat gun and safer. Simply fit your shrink band to your pre-roll tube and insert the tube into the steam cavity. Only 1-2 seconds is needed for the perfectly sealed shrink band every time. Each steam head is engineered to capture and funnel excess moisture back into the water reservoir avoiding having to refill your water tank. This steam head fits Pre Roll Tubes from .688" to .750" in diameter. Tubes compatible with this steam head include our: 68mmch, 78mmpr, 98mmpr, 116mmpr, 78mmpr-w, 90mmpr-w, 98mmpr-w, and 116mmpr-w. This steam head is compatible with either of our SST and SST SE Shrink Sleeve Labeling Machines.
SST SE Machine Versus SST System