PART NUMBER - 3104 MF
8 Dram (1 Gram) Child Resistant Pop Top Containers - 850 Qty.
As low as $0.075
squeeze open marijuana container
hinged marijuana container
510 cartomizer container
squeeze open marijuana container
  • Load image into Gallery viewer, squeeze open marijuana container
  • Load image into Gallery viewer, hinged marijuana container
  • Load image into Gallery viewer, 510 cartomizer container
  • Load image into Gallery viewer, squeeze open marijuana container
PART NUMBER - 3104 MF

8 Dram (1 Gram) Child Resistant Pop Top Containers - 850 Qty.

As low as $0.075

We have transitioned to Part# 8DRAM

We have phased out the 3104MF and have switched to an improved replacement, Part# 8DRAM.

If you have questions or concerns about this change please fill out the form below and we will get back to you. If you would rather speak to someone call us at: 714.602.2169

Description

This child resistant pop top tube has an outside length of 63mm and an outside diameter of 31mm. This is a nice small tube for holding 1 gram of flower. This tube is part of our MicroFlipz line that we developed several years ago. What is special about the MicroFlipz line is that they have sequential lengths. There are seven different lengths and two different diameters. The thinner series of tubes in this line all have an outside diameter of 25mm and all of those have a part number starting with 25. The wider series in this line have a diameter of 31mm and all of those have a part number starting with 31. The intention was to create a, "series of tubes" that a customer could use to package longer pre-roll tubes, shorter pre-roll tubes, vape cartridges, flower, and concentrates. We also made sure they were ASTM D-3475 certified child resistant and had thinner walls as a way to reduce plastic consumption. We offer other pop-top tubes now but this series will always be near and dear to our hearts. We also need to add that these are all made in USA at our factory in Tustin, California.

  • Part Number: 3104MF
  • Size: 8 Dram
  • Outside Diameter: 1.250"
  • Outside Height: 2.500"
  • Recommended Use(s): Flower and Vape Cartridges
  • Capacity (Flower): Fits 1 Gram
  • Capacity (Vape Cartridge): Fits 0.3ml, 0.5ml, and 1.0ml Vape Carts
  • Material: Polypropylene
  • Made In USA: We are the manufacturer!
  • Child Resistant: ASTM D-3475 Certified

Additional Information

  • Outside Diameter Top: 1.250 inches
  • Inside Diameter Top: 1.100 inches
  • Outside Diameter Bottom: 1.050 inches
  • Inside Diameter Bottom: 0.970 inches
  • Outside Height: 2.500 inches
  • Inside Height: 2.400 inches
  • Fluid Ounces: 0.95 ounces
  • Fluid Milliliters: 28 milliliters
  • Cubic Inches: 1.46 cubic inches
  • Cubic Centimeters: 28.0 cubic centimeters
  • Box Quantity: 850 pieces per box
  • Box Size: 20 inches tall x 16 inches wide x 13 inches deep
  • Box Weight: 14 pounds

Description

This child resistant pop top tube has an outside length of 63mm and an outside diameter of 31mm. This is a nice small tube for holding 1 gram of flower. This tube is part of our MicroFlipz line that we developed several years ago. What is special about the MicroFlipz line is that they have sequential lengths. There are seven different lengths and two different diameters. The thinner series of tubes in this line all have an outside diameter of 25mm and all of those have a part number starting with 25. The wider series in this line have a diameter of 31mm and all of those have a part number starting with 31. The intention was to create a, "series of tubes" that a customer could use to package longer pre-roll tubes, shorter pre-roll tubes, vape cartridges, flower, and concentrates. We also made sure they were ASTM D-3475 certified child resistant and had thinner walls as a way to reduce plastic consumption. We offer other pop-top tubes now but this series will always be near and dear to our hearts. We also need to add that these are all made in USA at our factory in Tustin, California.

  • Part Number: 3104MF
  • Size: 8 Dram
  • Outside Diameter: 1.250"
  • Outside Height: 2.500"
  • Recommended Use(s): Flower and Vape Cartridges
  • Capacity (Flower): Fits 1 Gram
  • Capacity (Vape Cartridge): Fits 0.3ml, 0.5ml, and 1.0ml Vape Carts
  • Material: Polypropylene
  • Made In USA: We are the manufacturer!
  • Child Resistant: ASTM D-3475 Certified

Additional Information

  • Outside Diameter Top: 1.250 inches
  • Inside Diameter Top: 1.100 inches
  • Outside Diameter Bottom: 1.050 inches
  • Inside Diameter Bottom: 0.970 inches
  • Outside Height: 2.500 inches
  • Inside Height: 2.400 inches
  • Fluid Ounces: 0.95 ounces
  • Fluid Milliliters: 28 milliliters
  • Cubic Inches: 1.46 cubic inches
  • Cubic Centimeters: 28.0 cubic centimeters
  • Box Quantity: 850 pieces per box
  • Box Size: 20 inches tall x 16 inches wide x 13 inches deep
  • Box Weight: 14 pounds

AMERICAN-MADE.

Our factory-direct packaging systems are developed, engineered, manufactured and warehoused in Southern California for quick access to great products at low pricing.

ROCK SOLID.

We’ve been manufacturing cool, compelling, compliant containers since apothecary packaging ruled. We’ve experienced the changes this booming industry has undergone, and we’ve grown right along with it

ECO SAVVY.

Our new EcoLite™ family of tubes and bowls contain up to 50% less plastic than comparable products. Walls are thinner. Products are lighter. Material is greatly reduced. Simple yet challenging solution with an ecologically responsible result.

MARKET STRONG.

Today’s fiercely competitive, tightly-legislated marketplace demands cost-effective, compliant, custom-branded packaging that distinguishes your products from competitors.